Menu 3 - Ethernet Setup
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
|
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 NetBIOS_WAN 7 _______________
2 NetBIOS_LAN 8 _______________
3 TEL_FTP_WEB_WAN 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 3
Edit Comments= TEL_FTP_WEB_WAN
Press ENTER to Confirm or ESC to Cancel:
|
Menu 21.3 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- --------------------------------------------------------------- - - -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=23 N D N
2 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=21 N D N
3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=80 N D F
4 N
5 N
6 N
Enter Filter Rule Number (1-6) to Configure: 3
|
Menu 21.3.3 - TCP/IP Filter Rule
Filter #: 3,3
Filter Type= TCP/IP Filter Rule
Active= Yes
IP Protocol= 6 IP Source Route= No
Destination: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 80
Port # Comp= Equal
Source: IP Addr=
IP Mask=
Port #=
Port # Comp= None
TCP Estab= No
More= No Log= None
Action Matched= Forward
Action Not Matched= Forward
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
|
Menu 15.2 - NAT Server Setup
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 80 80 192.168.1.33
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 1026 1026 RR Reserved
Press ENTER to Confirm or ESC to Cancel:
|
Menu 24.2.1 - System Maintenance - Information
Name: P316
Routing: IP
ZyNOS F/W Version: V3.26(CB.1) | 8/29/2001
LAN
Ethernet Address: 00:a0:c5:28:8a:6a
IP Address: 192.168.12.3
IP Mask: 255.255.255.0
DHCP: None
Press ESC or RETURN to Exit:
|
Mocht het niet lukken dan de router terugzetten in fabriekstoestand (dat kan met deze firmware via het webmenu) en opnieuw configureren.